|
|
 |
 |
|
| |
Allcases sales
force and In-house Engineering support can
guide you through the maze of the many options
available to you to make your case work for
you whether you are traveling to the Antarctica
or shipping cross country. Whether it be the
right color or the correct caster or type
of lock,
|
 |
(
<
1
2
A
B
C
D
E
F
G
H
I
K
L
M
O
P
R
S
T
U
V
W
|
|
 |
|
|
|
|
Replacement Foam Set for Pelican 1120
|
|
|
|
|
|
|
Replacement Foam set for the REPC1620 Pelican Case
|
|
|
|
|
|
|
Replacement O-Ring for Pelican 1120
|
|
Back to Top
|
|
|
|
|
Case size can be checked on most commercial airlines
|
|
 |
|
|
|
|
Folds small to fit in airline overheads or large suitcases.
|
|
 |
|
|
|
|
Case hinges are replaced with wing/turn catch-strike pairs, allowing lid to be completely removed. No charge for this option.
|
|
Back to Top
 |
|
|
|
|
Construction: .040 " high impact industrial grade ABS pressure-laminated to 1/4", 3/8", or 1/2" solid-core #1 grade plywood or LT plastic panel (lowers case weight up to 45%), Aluminum angle & valence, Stainless hinges, Recessed latches, Stacking ball corners.
|
|
 |
|
|
|
|
Hard-wearing fabric. Practical folder for documents and instruments.
|
|
Back to Top
 |
|
|
|
|
Aluminum hinged lid mounted inside top of case lid to allow protected storage. Can be foam lined for extra protection
|
|
 |
|
|
|
|
Blank bezel plates in 16 gauge aluminum. Flanged for strength. Brushed black anodized finish. [U = 1.75" (44.45 mm).]
|
|
|
|
|
|
|
Blank bezel plates in 16 gauge aluminum. Flanged for strength. Brushed black anodized finish. [U = 1.75" (44.45 mm).]
|
|
|
|
|
|
|
Blank bezel plates in 16 gauge aluminum. Flanged for strength. Brushed black anodized finish. [U = 1.75" (44.45 mm).]
|
|
Back to Top
|
|
|
|
|
Gasket kit to provide water resistant protection for the instrument bezel plate
|
|
 |
|
|
|
|
Bumpers Plastic bumpers added to the back of the case to protect the telescoping handle.
|
|
Back to Top
|
|
|
|
|
Designed to fit the racks with locking latches. This cage is a unique product which allows a deeper cover on front and rear of music rackmounts. Webbing creates a cage with a zip-out panel for easy access.
|
|
Back to Top
|
|
|
|
|
Brake can be used on either a swivel or straight caster
|
|
|
|
|
|
|
For stacking like sized cases with casters.
|
|
 |
|
|
|
|
Removable casters are securely stored in lid using Hardigg Fast clip(storage plate) mounting plate system. It can only be used with 5” deep lids.
|
|
Back to Top
 |
|
|
|
|
These rugged caster assemblies are installed along a bottom edge of a single lid case to permit wheeled movement of the case in a cart-like fashion. Each heavy-duty caster wheel is in a durable cast aluminum or structural plastic housing uniquely designed to resist impact and rough handling abuse. Not available on all case sizes.
|
|
 |
|
|
|
|
2" Edge Casters on the DX Case
|
|
 |
|
|
|
|
2" Edge Caster for RR Case
|
|
Back to Top
|
|
|
|
|
Our engineered caster mounting system allows the quick release button convenience of our more rugged 3.5” caster system. The caster set includes a set of 4 casters along with the appropriate quick release mounting brackets installed on the bottom of the case.
|
|
|
|
|
|
|
Our engineered caster mounting system enhances the bottom panel strength of rack cases, while providing the same button release convenience of the FastClipÔ mounting plate system found on our single-lid rotationally molded cases. These swivel style casters are Colson or equivalent brand, available in removable or fixed 3.5" or 5" wheel diameters. The caster set includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.
|
|
 |
|
|
|
|
Our engineered caster mounting system can enhance the bottom panel strength of rack cases, while providing the same button release convenience of the FastClipÔ mounting plate system found on our single-lid rotationally molded cases. These swivel style casters are Colson or equivalent brand, available in removable or fixed 3.5" or 5" wheel diameters. The caster set includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.
|
|
 |
|
|
|
|
Our engineered caster mounting system can enhance the bottom panel strength of rack cases, while providing the same button release convenience of the FastClipÔ mounting plate system found on our single-lid rotationally molded cases. These swivel style casters are Colson or equivalent brand, available in removable or fixed 3.5" or 5" wheel diameters. The caster set includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.
|
|
Back to Top
|
|
|
|
|
Our engineered caster mounting system enhances the bottom panel strength of rack cases, while providing the same button release convenience of the FastClipÔ mounting plate system found on our single-lid rotationally molded cases. These swivel style casters are Colson or equivalent brand, available in removable or fixed 3.5" or 5" wheel diameters. The caster set includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.
|
|
|
|
|
|
|
Our engineered caster mounting system enhances the bottom panel strength of rack cases, while providing the same button release convenience of the FastClipÔ mounting plate system found on our single-lid rotationally molded cases. These swivel style casters are Colson or equivalent brand, available in removable or fixed 3.5" or 5" wheel diameters. The caster set includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.
|
|
Back to Top
|
|
|
|
|
Polyethylene cases are resistant to most solvents including fuels, alcohol and cleaning agents.
|
|
Back to Top
Back to Top
Back to Top
 |
|
|
|
|
Combination lock which is approved by the TSA (Transportation Security Administration) and can be used at all airports. TSA has special keys to open the lock and the lock color code will change from Green to Red to show that the lock has been opened by security. The TSA will leave a Notification of Baggage Inspection in your case if they open it.
|
|
|
|
|
|
|
Integral skin custom-molded foam tray for the IM2370 that easily fits computers up to 15.4"(screen size), and includes configured compartments for cd/dvd and zip drives, spare batteries, stand-alone hard drives, digital cameras and exrternal mice
|
|
|
|
|
|
|
Wall thickness of case will change from an economic standard of 1/4" thick wall to 1/2 thick. This will provide the maximum durability.
|
|
Back to Top
|
|
|
|
|
Wall thickness of case will change from an economic standard of 1/4" thick wall to 3/8 thick. This will provide a more rugged and durable case.
|
|
 |
|
|
|
|
Elastomeric devices to couple vertically stacked containers to prevent accidental tip over.
|
|
 |
|
|
|
|
Recommended for applications where the standard zinc-plate or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical environments.
|
|
|
|
|
|
|
Standard hardware on single lid rotational molded cases
|
|
Back to Top
 |
|
|
|
|
19" rack mountable drawers are 14" (356 mm) deep and key-lockable. Complete with drawer slides. [U = 1.75" (44.45 mm).]
|
|
|
|
|
|
|
19" rack mountable drawers are 14" (356 mm) deep and key-lockable. Complete with drawer slides. [U = 1.75" (44.45 mm).]
|
|
|
|
|
|
|
19" rack mountable drawers are 14" (356 mm) deep and key-lockable. Complete with drawer slides. [U = 1.75" (44.45 mm).]
|
|
|
|
|
|
|
For rack mount cases with more than 170 lb. (77 Kg) of packaged equipment, sixteen elastomeric shock mounts are used instead of the standard eight. Vertical metal wall stiffeners are added to the case body to retain dimensional control of the two openings and ensure that the covers can easily go back on the case body and latch properly.
|
|
Back to Top
|
|
|
|
|
For rack mount cases with more than 170 lb. (77 Kg) of packaged equipment, sixteen elastomeric shock mounts are used instead of the standard eight. Vertical metal wall stiffeners are added to the case body to retain dimensional control of the two openings and ensure that the covers can easily go back on the case body and latch properly. Four delta lifting/tie-down rings are also installed to provide mechanical lift accessibility.
|
|
|
|
|
|
|
Allows mounting of equipment 30” deep depending on case size and configuration
|
|
 |
|
|
|
|
Accommodates standard size keyboard. 24" (610 mm) wide, 12" (305 mm) deep. Attaches to case front catches.
|
|
| | |
