No
Foam
The case is provided empty inside with no
foam cushioning at all. This is good for items
that have no fragility such as cables, clothing,
literature,
Foam Lined
The case comes with foam lining on all 6 sides.
The most common foam linings are 1" or
2" thick, but any size is available.
This is a great interior for accessory cases
or cases that will be used to ship multiple
items that are not extremely fragile.
Foam Filled
The case comes with the entire interior filled
with foam. The foam can be in 1" or 2"
thick layers or be a solid piece. This is
good for people who want to cut the foam themselves
to meet their own requirements.
Pick 'n Pluck
The case comes filled with foam that is pre-scored
in 1/2" by 1/2" squares that are
easily removable to create your own custom
interior. The lid generally has a solid or
convoluted (egg crate) foam filling. This
type of foam is primarily designed for smaller
case applications and size limitations do
apply.
Custom Foam
The case comes with a complete custom fit
interior. The foam is custom designed to the
exact dimensional specifications of your equipment.
This can range from simple to complex shapes.
This is the preferred foam interior for delicate
electronic pieces such as computers, monitors,
video gear, and all other types of fragile
equipment.
Foam
Types
Density
Characteristics
Polyethylene
2
lbs/cubic foot
Firm,
closed cell foam, best for general use
with heavier equipment. Color charcoal
gray. Meets MIL P 26514, type 1, class
2 specifications.
Polyurethane
1.8
lbs/cubic foot
Softer,
open-cell foam, best for lighter weight
sensitive equipment with high volume
to weight ratio. Color charcoal gray.
ELE
1.6
lbs/cubic foot
Lower
cost Poly-Ether with the look and feel
of polyurethane foam. Best for lighter
weight, less expensive equipment with
high volume to weight ratio. Color charcoal
gray.
Cross
Linked
2.0
lbs/cubic foot
Closed
cell, with a smoother surface feel than
regular polyethylene. Good for applications
outside the normal PE foam area, replacing
materials such as vinyl foams, neoprene,
natural rubbers, polystyrene and other
polymeric materials. Color charcoal
gray.
Custom Foam Inserts
and Fabrication
Allcases specializes in manufacturing custom
foam design inserts. Allcases in-house
foam technician has been designing custom
foam inserts since 1985. No foam is too complicated
or too simple when it comes to protecting
your equipment. Allcases understands that
your product is the life of your business.
Allcases is committed to making sure the case
design is the best possible solution for your
transportation needs. Let our foam technician
make sure all factors of your equipment have
been taken into consideration before it is
transported.
Allcases works directly with our foam manufacturer
to insure that the right type of foam is used
in protecting sensitive electronic equipment
to transporting heavy tools. Climate, altitude,
water, equipment weight are just a few factors
that must be considered when designing a case.
